Interface elements
This page gives an overview of user interface indication and switch names.
Often the first step in fault analysis of esense systems is to understand the indications on the User Interface. The availability of indications depends on the system configuration (e.g. systems without esense battery pack cannot show battery indications and key lock or immobilizer indications can only be shown when this functionality is activated during installation).
In the troubleshoot guide is referred to the indication and switch names of the User Interface as listed in the following overview:
Emergency (EMO) switch – active on all versions
USB connector – active on all versions
Magnet key lock – optional, to be activated by trolley supplier
On/off switch – active on all versions
Hidden key lock switch – optional, to be activated by trolley supplier
Left docking switch – active on E1409-9040/-9050/-9060
Right docking switch – active on E1409-9040/-9050/-9060
Service indication – active on all versions (but only lit in case of service errors)
Battery indication – active on E1409-9020/-9030/-9050/-9060
System status indication – active on all versions
Immobilizer indication – optional, to be activated by trolley supplier
Key lock indication – optional, to be activated by trolley supplier
Emergency (EMO) switch – active on all versions
USB connector – active on all versions
Magnet key lock – optional, to be activated by trolley supplier
On/off switch – active on all versions
Hidden key lock switch – optional, to be activated by trolley supplier
Left docking switch – active on E1409-9040/-9050/-9060
Right docking switch – active on E1409-9040/-9050/-9060
Service indication – active on all versions (but only lit in case of service errors)
Battery indication – active on E1409-9020/-9030/-9050/-9060
System status indication – active on all versions
Immobilizer indication – optional, to be activated by trolley supplier
Key lock indication – optional, to be activated by trolley supplier
